Radius Server Attribute 4; Radius Server Key; Radius Server Msgauth - D-Link DWL-8500AP Command Reference Manual

no radius server host
This command is used to remove the configured RADIUS authentication server or the
RADIUS accounting server. If the 'auth' token is used, the previously configured RADIUS
authentication server is removed from the configuration. Similarly, if the 'acct' token is used,
the previously configured RADIUS accounting server is removed from the configuration. The
parameter must match the IP address of the previously configured RADIUS
<ipaddr>
authentication / accounting server.
Format
Mode

radius server attribute 4

Use this command to enable the Radius Attribute 4 (NAS-IP Address) inclusion in RADIUS
requests. Use the optional
the NAS-IP address to the RADIUS servers. If you do not specify a value for the
variable, then the outgoing interface IP address that is used to send the packet to the RADIUS
server is added as NAS-IP Address.
Default
Format
Mode
no radius server attribute 4
Use this command to disable the Radius Attribute 4 (NAS-IP Address) inclusion in RADIUS
requests.
Format
Mode

radius server key

This command is used to configure the shared secret between the RADIUS client and the
RADIUS accounting / authentication server. Depending on whether the 'auth' or 'acct' token is
used, the shared secret is configured for the RADIUS authentication or RADIUS accounting
server. The IP address provided must match a previously configured server. When this
command is executed, the secret is prompted.
The secret must be an alphanumeric value not exceeding 16 characters.
NOTE:
Format
Mode

radius server msgauth

This command enables the message authenticator attribute for a specified server.
Format
Mode
no radius server host {auth | acct} <ipaddress>
Global Config
variable to explicitly include the IP address to be sent as
[ipaddr]
disabled
radius server attribute 4 [ipaddr]
Global Config
radius server attribute 4
Global Config
radius server key {auth | acct} <ipaddr>
Global Config
radius server msgauth <ipaddr>
Global Config
7 Management Commands
[ipaddr]
RADIUS Commands 319