Assign-Queue; Drop; Conform-Color; Class - D-Link DWL-8500AP Command Reference Manual

CLI Command Reference
NOTE:
The CLI command root is

assign-queue

This command modifies the queue id to which the associated traffic stream is assigned. The
queueid
device.
Format
Mode
Incompatibilities Drop

drop

This command specifies that all packets for the associated traffic stream are to be dropped at
ingress.
Format
Mode
Incompatibilities Assign Queue, Mark (all forms), Police

conform-color

Use this command to enable color-aware traffic policing and define the conform-color class
map. Used in conjunction with the police command where the fields for the conform level are
specified. The
NOTE:
Format
Mode

class

This command creates an instance of a class definition within the specified policy for the
purpose of defining treatment of the traffic class through subsequent policy attribute
statements. The
NOTE:
NOTE:
Format
238 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
The only way to remove an individual policy attribute from a class instance within a
policy is to remove the class instance and re-add it to the policy. The values associated
with an existing policy attribute can be changed without removing the class instance.
policy-map
is an integer from 0 to
n
assign-queue <queueid>
Policy-Class-Map Config
drop
Policy-Class-Map Config
<class-map-name>
This command may only be used after specifying a police command for the
policy-class instance.
conform-color <class-map-name>
Policy-Class-Map Config
is the name of an existing DiffServ class.
<classname>
This command causes the specified policy to create a reference to the class
definition.
The CLI mode is changed to Policy-Class-Map Config when this command is
successfully executed.
class <classname>
.
-1, where is the number of egress queues supported by the
n
parameter is the name of an existing Diffserv class map.