Host; Lease - D-Link DWL-8500AP Command Reference Manual

Default
Format
Mode
no hardware-address
This command removes the hardware address of the DHCP client.
Format
Mode

host

This command specifies the IP address and network mask for a manual binding to a DHCP
client. Address and Mask are valid IP addresses; each made up of four decimal bytes ranging
from 0 to 255. IP address 0.0.0.0 is invalid. The prefix-length is an integer from 0 to 32
Default
Format
Mode
no host
This command removes the IP address of the DHCP client.
Format
Mode

lease

This command configures the duration of the lease for an IP address that is assigned from a
DHCP server to a DHCP client. The overall lease time should be between 1-86400 minutes. If
you specify
infinite
is an integer from 0 to 59.
86399.
Default
Format
Mode
no lease
This command restores the default value of the lease time for DHCP Server.
Format
Mode
ethernet
hardware-address <hardwareaddress> <type>
DHCP Pool Config
no hardware-address
DHCP Pool Config
none
host <address> [{<mask> | <prefix-length>}]
DHCP Pool Config
no host
DHCP Pool Config
, the lease is set for 60 days. You can also specify a lease duration.
is an integer from 0 to 1439.
Hours
1 (day)
lease [{<days> [<hours>] [<minutes>] | infinite}]
DHCP Pool Config
no lease
DHCP Pool Config
6 Utility Commands
is an integer from 0 to
Minutes
DHCP Server Commands
Days
283