Wep Authentication; Wep Tx-Key - D-Link DWL-8500AP Command Reference Manual

CLI Command Reference
none
static-wep
wep-dot1x
wpa-enterprise WPA 802.1x authentication.
wpa-personal WPA shared-key authentication.
no security mode
The version of this command sets the security mode to its default value.
no
Format
Mode

wep authentication

This command configures the static WEP authentication mode for the network. This value is
applicable only when the security mode is configured for static WEP authentication and
encryption.
Default
Format
Mode
open system
shared-key
no wep authentication
The no version of this command sets WEP authentication mode to the default value, which is
open system.
Format
Mode

wep tx-key

This command configures the WEP key index to be used for encryption on the network. This
value is applicable only when the security mode is configured for WEP shared key
authentication and encryption.
Default
Format
Mode
1-4
160 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
No authentication or encryption on the network.
Static WEP encryption, authentication is configured separately.
Dynamic WEP authentication using 802.1x.
no security mode
Network Config
Open System
wep authentication {open-system [shared-key] | shared-key}
Network Config
No authentication required.
Clients are required to authenticate to the network using a shared key.
no wep authentication
Network Config
1
wep tx-key <1-4>
Network Config
A valid WEP key index value.