Table 6. Cli Mode Access And Exit - D-Link DWL-8500AP Command Reference Manual

D-Link Unified Access System CLI Command Reference
Table 5. CLI Command Modes
Command
Mode
Wireless Config
Mode
AP Config Mode
AP Profile Config
Mode
AP Profile Radio
Config Mode
AP Profile VAP
Config Mode
Network Config
Mode
Captive Portal
Config Mode
Captive Portal
Instance Mode
Table 6

Table 6. CLI Mode Access and Exit

Command
Mode
User EXEC
Privileged EXEC
Global Config
VLAN Config
Interface Config
Line Config
32 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
Switch (Config-wireless)#
Switch (Config-ap)#
Switch (Config-ap-profile)#
Switch (Config-ap-profile-radio)#
Switch (Config-ap-profile-vap)#
Switch (Config-network)#
Switch (Config-CP)#
Switch (Config-CP 1)#
explains how to enter or exit each mode.
Access Method
This is the first level of access.
From the User EXEC mode, enter
.
enable
From the Privileged EXEC mode,
enter
configure
From the Privileged EXEC mode,
enter
vlan database
From the Global Config mode, enter
interface <slot/port> or
interface loopback <id>
interface tunnel <id>
From the Global Config mode, enter
lineconfig
Prompt
.
.
or
or
.
Mode Description
Contains global WLAN switch
configuration commands and
provides access to other WLAN
command modes.
Contains commands to config-
ure entries in the local AP data-
base, which is used for AP
validation.
Contains commands to config-
ure the default AP profile set-
tings as well as settings for new
AP profile.
Contains commands to modify
the radio configuration parame-
ters for an AP profile.
Contains commands to config-
ure radio 1 or radio 2 within an
AP profile.
Contains commands to config-
ure WLAN settings for up to 64
different networks.
Contains commands to config-
ure global captive portal settings
Contains commands to config-
ure a captive portal instance.
Exit or Access Previous Mode
To exit, enter .
logout
To exit to the User EXEC mode, enter
or press Ctrl-Z.
exit
To exit to the Privileged EXEC mode,
enter , or press Ctrl-Z.
exit
To exit to the Privileged EXEC mode,
enter , or press Ctrl-Z.
exit
To exit to the Global Config mode,
enter . To return to the Privileged
exit
EXEC mode, enter Ctrl-Z.
To exit to the Global Config mode,
enter . To return to the Privileged
exit
EXEC mode, enter Ctrl-Z.