Client Association Status And Statistics Commands; Wireless Client Disassociate; Show Wireless Client Status - D-Link DWL-8500AP Command Reference Manual

Status
Discovered Age Time in seconds since this AP was first detected in an RF scan.
Age

Client Association Status and Statistics Commands

The commands in this section provide views and management of all status and statistics for
wireless clients. In addition to commands to display data from the associated client
perspective, this section includes commands to display a view of all clients associated to a
specific VAP, and to display a view of all clients associated to a specific SSID.

wireless client disassociate

This command initiates a request to disassociate a client associated to a managed AP specified
by the client MAC address. The Unified Switch will send a message to the appropriate
managed AP to force the disassociation.
Format
Mode
macaddr

show wireless client status

This commands displays summary or detailed data for clients associated to a managed AP.
Format
Mode
macaddr
MAC Address The Ethernet address of the client station.
Tunnel IP Address This field is blank for all non-tunneled clients. For a tunneled client, this
Indicates the managed status of the AP, whether this is a valid AP known to
the switch or a Rogue on the network. The valid values are:
WS Managed - The neighbor AP is managed by this switch, the neighbor AP
status can be referenced using its base MAC address.
Peer WS Managed - The neighbor AP is managed by another switch within
the peer group.
Standalone - The AP is managed in standalone mode and configured as a valid
AP entry (local or RADIUS).
Acknowledged Rogue - The AP is configured as a valid AP entry (local or
RADIUS), it has been acknowledged and is not reported as Rogue.
Ad Hoc Rogue - The AP neighbor was detected participating in an ad hoc network.
Time in seconds since this AP was last detected in an RF scan.
wireless client disassociate <macaddr>
Privileged EXEC
Client MAC address
show wireless client [<macaddr>] status
Privileged EXEC
Client MAC address
is the assigned tunnel IP address.
Client Association Status and Statistics Commands
4 Wireless Commands
199