Lldp Transmit-Mgmt; Lldp Notification - D-Link DWL-8500AP Command Reference Manual

Use to transmit the port description TLV. To configure the port description, see See
port-desc
"description" on page 38.
Default
Format
Mode
no lldp transmit-tlv
Use this command to remove an optional TLV from the LLDPDUs. Use the command without
parameters to remove all optional TLVs from the LLDPDU.
Format.
Mode

lldp transmit-mgmt

Use this command to include transmission of the local system management address
information in the LLDPDUs.
Format
Mode
no lldp transmit-mgmt
Use this command to include transmission of the local system management address
information in the LLDPDUs. Use this command to cancel inclusion of the management
information in LLDPDUs.
Format
Mode

lldp notification

Use this command to enable remote data change notifications.
Default
Format
Mode
no lldp notification
Use this command to disable notifications.
Default
Format
Mode
no optional TLVs are included
lldp transmit-tlv [sys-desc] [sys-name] [sys-cap] [port-desc]
Interface Config
no lldp transmit-tlv [sys-desc] [sys-name] [sys-cap] [port-desc]
Interface Config
lldp transmit-mgmt
Interface Config
no lldp transmit-mgmt
Interface Config
disabled
lldp notification
Interface Config
disabled
no lldp notification
Interface Config
2 Switching Commands
LLDP (802.1AB) Commands 107