CLI Command Reference
no dot1x port-control
This command sets the authentication mode on the specified port to the default value.
Format
Mode
dot1x port-control all
This command sets the authentication mode to use on all ports. Select
specify that the authenticator PAE unconditionally sets the controlled port to unauthorized.
Select
force-authorized
controlled port to authorized. Select
controlled port mode to reflect the outcome of the authentication exchanges between the
supplicant, authenticator and the authentication server.
Default
Format
Mode
no dot1x port-control all
This command sets the authentication mode on all ports to the default value.
Format
Mode
dot1x re-authenticate
This command begins the re-authentication sequence on the specified port. This command is
only valid if the control mode for the specified port is 'auto'. If the control mode is not 'auto' an
error will be returned.
Format
Mode
dot1x re-authentication
This command enables re-authentication of the supplicant for the specified port.
Default
Format
Mode
no dot1x re-authentication
This command disables re-authentication of the supplicant for the specified port.
Format
Mode
76
© 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
no dot1x port-control
Interface Config
to specify that the authenticator PAE unconditionally sets the
auto
auto
dot1x port-control all {force-unauthorized | force-authorized |
auto}
Global Config
no dot1x port-control all
Global Config
dot1x re-authenticate <slot/port>
Privileged EXEC
disabled
dot1x re-authentication
Interface Config
no dot1x re-authentication
Interface Config
to specify that the authenticator PAE sets the
to
force-unauthorized