Ip Ssh Server Enable; Sshcon Maxsessions; Sshcon Timeout - D-Link DWL-8500AP Command Reference Manual

ip ssh server enable

This command enables the IP secure shell server.
Default
Format
Mode
no ip ssh server enable
This command disables the IP secure shell server.
Format
Mode

sshcon maxsessions

This command specifies the maximum number of SSH connection sessions that can be
established. A value of 0 indicates that no ssh connection can be established. The range is 0 to
5.
Default
Format
Mode
no sshcon maxsessions
This command sets the maximum number of allowed SSH connection sessions to the default
value.
Format
Mode

sshcon timeout

This command sets the SSH connection session timeout value, in minutes. A session is active
as long as the session has been idle for the value set. The time is a decimal value from 1 to 160.
Changing the timeout value for active sessions does not become effective until the session is re
accessed. Also, any keystroke activates the new timeout duration.
Default
Format
Mode
no sshcon timeout
This command sets the SSH connection session timeout value, in minutes, to the default.
Changing the timeout value for active sessions does not become effective until the session is re
accessed. Also, any keystroke activates the new timeout duration.
disabled
ip ssh server enable
Privileged EXEC
no ip ssh server enable
Privileged EXEC
5
sshcon maxsessions <0-5>
Privileged EXEC
no sshcon maxsessions
Privileged EXEC
5
sshcon timeout <1-160>
Privileged EXEC
7 Management Commands
Secure Shell (SSH) Command 303