Vlan (Network Config Mode); Hide-Ssid; Security Mode - D-Link DWL-8500AP Command Reference Manual

Format
Mode
name

vlan (Network Config Mode)

This command configures the default VLAN ID for the network. If there is no RADIUS server
configured or a client is not associated with a VLAN via RADIUS, this is the VLAN assigned.
Default
Format
Mode
1-4094
no vlan
The version of this command sets the default VLAN ID for the network to its default value.
no
Format
Mode

hide-ssid

This command enables hiding of the SSID for this network. If enabled, the SSID is not
included in the AP beacon frames.
Default
Format
Mode
no hide-ssid
The version of this command disables hiding of the SSID for this network.
no
Format
Mode

security mode

This command configures the authentication and encryption mode on the network.
Default
Format
Mode
< >
ssid name
Network Config
Service Set Identifier, must be between 1-32 alphanumeric characters. To use
spaces in the SSID, use quotes around the name.
1 – Default VLAN
vlan <1-4094>
Network Config
A valid VLAN ID.
no vlan
Network Config
Disable
hide-ssid
Network Config
no hide-ssid
Network Config
none
security mode {none | static-wep | wep-dot1x | wpa-enterprise |
wpa-personal}
Network Config
4 Wireless Commands
Wireless Network Commands 159