Ip Dhcp Excluded-Address - D-Link DWL-8500AP Command Reference Manual

CLI Command Reference
no next-server
This command removes the boot server list.
Format
Mode
option
The
option
DHCP option code and ranges from 1-254. The
ASCII character string. ASCII character strings that contain white space must be delimited by
quotation marks. The
character strings are two hexadecimal digits. You can separate each byte by a period (for
example, a3.4f.22.0c), colon (for example, a3:4f:22:0c), or white space (for example, a3 4f 22
0c).
Default
Format
Mode
no option
This command removes the DHCP Server options. The
option code.
Format
Mode

ip dhcp excluded-address

This command specifies the IP addresses that a DHCP server should not assign to DHCP
clients. Low-address and high-address are valid IP addresses; each made up of four decimal
bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.
Default
Format
Mode
no ip dhcp excluded-address
This command removes the excluded IP addresses for a DHCP client. Low-address and high-
address are valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP
address 0.0.0.0 is invalid.
Format
Mode
286 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
no next-server
DHCP Pool Config
command configures DHCP Server options. The
hex <string>
none
option <code> {ascii string | hex <string1>
[<string2>...<string8>] | ip <address1>
[<address2>...<address8>]}
DHCP Pool Config
no option <code>
DHCP Pool Config
none
ip dhcp excluded-address <lowaddress> [highaddress]
Global Config
no ip dhcp excluded-address <lowaddress> [highaddress]
Global Config
<ascii string>
parameter specifies hexadecimal data. In hexadecimal,
<code>
parameter specifies the
<code>
parameter specifies an NVT
parameter specifies the DHCP