Show Classofservice Dot1P-Mapping; Show Classofservice Ip-Precedence-Mapping; Show Classofservice Ip-Dscp-Mapping - D-Link DWL-8500AP Command Reference Manual

CLI Command Reference
no traffic-shape
This command restores the interface shaping rate to the default value.
Format
Modes

show classofservice dot1p-mapping

This command displays the current Dot1p (802.1p) priority mapping to internal traffic classes
for a specific interface. The
that support independent per-port class of service mappings. If specified, the 802.1p mapping
table of the interface is displayed. If omitted, the most recent global configuration settings are
displayed. For more information, see
Format
Mode
The following information is repeated for each user priority.
User Priority The 802.1p user priority value.
Traffic Class

show classofservice ip-precedence-mapping

This command displays the current IP Precedence mapping to internal traffic classes for a
specific interface. The slot/port parameter is optional and is only valid on platforms that
support independent per-port class of service mappings. If specified, the IP Precedence
mapping table of the interface is displayed. If omitted, the most recent global configuration
settings are displayed.
Format
Mode
The following information is repeated for each user priority.
IP Precedence The IP Precedence value.
Traffic Class

show classofservice ip-dscp-mapping

This command displays the current IP DSCP mapping to internal traffic classes for the global
configuration settings.
Format
Mode
The following information is repeated for each user priority.
230 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
no traffic-shape
Global Config
Interface Config
<slot/port>
"Provisioning (IEEE 802.1p) Commands"
show classofservice dot1p-mapping [<slot/port>]
Privileged EXEC
The traffic class internal queue identifier to which the user priority value is
mapped.
show classofservice ip-precedence-mapping [<slot/port>]
Privileged EXEC
The traffic class internal queue identifier to which the IP Precedence value is
mapped.
show classofservice ip-dscp-mapping
Privileged EXEC
parameter is optional and is only valid on platforms
on page 64.