Access Point Failure Status Commands; Clear Wireless Ap Failure List; Show Wireless Ap Failure Status - D-Link DWL-8500AP Command Reference Manual

Format
Mode
File Name
File Path
Server Address The TFTP server IP address.
Group Size
Download Status The global status for the code download request.
Total Count
Success Count Indicates the total number of managed APs that have successfully down-
Failure Count Indicates the total number of managed APs that have failed to download their

Access Point Failure Status Commands

The commands in this section provide views and management of data maintained for access
point association and authentication failures.

clear wireless ap failure list

This command deletes all entries from the AP failure list, entries normally age out according
to the configured age time. The AP failure list includes entries for all APs that have failed to
validate or authenticate to the Unified Switch.
Format
Mode

show wireless ap failure status

This command displays summary or detailed data for entries in the AP failure list. Entries are
added to the list when the Unified Switch fails to validate or authenticate an AP.
Format
Mode
macaddr
show wireless ap download
Privileged EXEC
The AP image file name on the TFTP server.
The file path on the TFTP server.
If a code download request is for all managed APs, the switch processes the
request for one group of APs at a time before starting the next group. The
group size indicates the maximum number of APs the switch will send the
code download request to at one time.
The total number of managed APs being updated in the current code down-
load request. This may be one AP or the total number of managed APs at the
time a code download request is started.
loaded their code for the current code download request.
code for the current code download request.
clear wireless ap failure list
Privileged EXEC
show wireless ap [<macaddr>] failure status
Privileged EXEC
The failure AP MAC address.
4 Wireless Commands
Access Point Failure Status Commands 197