CLI Command Reference
show wireless vap client status
This command displays summary data for all managed AP VAPs with associated clients. If the
optional VAP MAC address is specified, the display will only show clients associated to the
specific managed AP VAP.
Format
Mode
macaddr
VAP MAC Address Indicates the Ethernet MAC address for the managed AP VAP where
MAC Address The Ethernet address of client station.
show wireless ssid client status
This command displays summary data for all managed SSIDs with associated clients. If the
optional SSID string is specified, the display will only show clients associated to that network.
The SSID/network may exist on one or more managed AP VAPs.
Format
Mode
ssid
MAC Address The Ethernet address of the client station.
SSID
Client Failure and Ad Hoc Status Commands
The commands in this section provide views and management of data maintained for wireless
client association and authentication failures.
clear wireless client failure list
This command deletes all entries from the client failure list. Entries normally age out
according to the configured age time.
Format
Mode
clear wireless client adhoc list
This command deletes all entries from the Ad Hoc client list. Entries normally age out
according to the configured age time.
Format
202
© 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
show wireless vap [<macaddr>] client status
Privileged EXEC
Switch managed AP VAP MAC address.
this client is associated.
show wireless ssid [<ssid>] client status
Privileged EXEC
Service Set Identifier for the network.
Indicates the network on which the client is connected.
clear wireless client failure list
Privileged EXEC
clear wireless client adhoc list