Macfilter Addsrc All; Show Mac-Address-Table Static; Show Mac-Address-Table Staticfiltering - D-Link DWL-8500AP Command Reference Manual

CLI Command Reference
Format
Mode

macfilter addsrc all

This command adds all interfaces to the source filter set for the MAC filter with the MAC
address of
hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The
identify a valid VLAN.
Format
Mode
no macfilter addsrc all
This command removes all interfaces to the source filter set for the MAC filter with the MAC
address of
a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
<vlanid>
Format
Mode

show mac-address-table static

This command displays the Static MAC Filtering information for all Static MAC Filters. If
you select
for
<macaddr>,
MAC Filter information only for that MAC address and VLAN.
Format
Mode
MAC Address The MAC Address of the static MAC filter entry.
VLAN ID
Source Port(s) The source port filter set's slot and port(s).

show mac-address-table staticfiltering

This command displays the Static Filtering entries in the Multicast Forwarding Database
(MFDB) table.
Format
Mode
Mac Address A unicast MAC address for which the switch has forwarding and or filtering
96 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
no macfilter addsrc <macaddr> <vlanid>
Interface Config
and
<macaddr> <vlanid>
macfilter addsrc all <macaddr> <vlanid>
Global Config
and VLAN of
<macaddr>
parameter must identify a valid VLAN.
no macfilter addsrc all <macaddr> <vlanid>
Global Config
, all the Static MAC Filters in the system are displayed. If you supply a value
<all>
you must also enter a value for
show mac-address-table static {<macaddr> <vlanid> | all}
Privileged EXEC
The VLAN ID of the static MAC filter entry.
show mac-address-table staticfiltering
Privileged EXEC
information. The format is 6 or 8 two-digit hexadecimal numbers that are sep-
arated by colons, for example 01:23:45:67:89:AB. In an IVL system the MAC
address will be displayed as 8 bytes.
. You must specify the
<macaddr>
. You must specify the
<vlanid>
, and the system displays Static
<vlanid>
parameter as a 6-byte
parameter must
<vlanid>
parameter as
<macaddr>