CLI Command Reference
show version
This command displays inventory information for the switch.
NOTE:
Format
Mode
Switch Description Text used to identify the product name of this switch.
Machine Type The machine model as defined by the Vital Product Data.
Machine Model The machine model as defined by the Vital Product Data.
Serial Number The unique box serial number for this switch.
FRU Number The field replaceable unit number.
Part Number Manufacturing part number.
Maintenance Level Hardware changes that are significant to software.
Manufacturer Manufacturer descriptor field.
Burned in MAC Address Universally assigned network address.
Software Version The release.version.revision number of the code currently running on the
Operating System The operating system currently running on the switch.
Network Processing Device The type of the processor microcode.
Additional Packages The additional packages incorporated into this system.
show interface
This command displays a summary of statistics for a specific interface or a count of all CPU
traffic based upon the argument.
Format
Mode
The display parameters, when the argument is
Packets Received Without Error The total number of packets (including broadcast packets
Packets Received With Error The number of inbound packets that contained errors prevent-
Broadcast Packets Received The total number of packets received that were directed to the
Packets Transmitted Without Error The total number of packets transmitted out of the
Transmit Packets Errors The number of outbound packets that could not be transmitted
258
© 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
The
command will replace the
show version
future releases of the software.
show version
Privileged EXEC
switch.
show interface {<slot/port> | switchport}
Privileged EXEC
and multicast packets) received by the processor.
ing them from being deliverable to a higher-layer protocol.
broadcast address. Note that this does not include multicast packets.
interface.
because of errors.
show hardware
, is as follows:
<slot/port>
command in