Toner Save; Gradation Level - Canon Laser Shot LBP5970 User Manual

GRADATION LEVEL

5

TONER SAVE

5-44 SETUP Menu Settings
1 1
HIGH 1* * , HIGH 2* , STANDARD*
*1 HIGH 1 and HIGH 2 are displayed only when RESOLUTION is set to FINE.
*2 STANDARD is displayed only when RESOLUTION is set to SUPER FINE.
Specifies the gradation level for data.
This item is fixed at STANDARD when RESOLUTION (See the previous item) is
set to SUPER FINE. When RESOLUTION is set to FINE, you can select HIGH 1
or HIGH 2.
Specify HIGH 1 when printing pictures or other data in general quality and specify
HIGH 2 when printing in higher quality.
● About memory amount required for using the HIGH 2 mode
Printing in the HIGH 2 mode requires a large amount of memory for data
process. Therefore, when the HIGH 2 mode is specified, the message <39 SPL
MEM.FULL> may appear depending on the amount or type of data, disabling
printing. In this case, print with GRADATION LEVEL set to HIGH 1, or install an
optional expansion RAM module as needed. For details on the optional
expansion RAM modules, see Getting Started Guide.
OFF*, ON
Specifies whether to use the toner save mode that is suitable for when printing a
proof sheet.
2