Cms Selection - Canon Laser Shot LBP5970 User Manual

CMS

■ CMS SELECTION

PRINTER*, HOST
Specifies which device the printer or host (the printer driver) is to be used for color
processing.
If PRINTER is specified, the color processing is performed on the printer.
If HOST is specified, the color processing is not performed on the printer.
IMPORTANT
If the setting for CMS (Matching) on the host (the printer driver) is set to [Driver
•
Matching Mode], the setting for this item is ignored even if PRINTER is specified,
the host performs the color correction process.
If HOST is specified for this item, the host that is not connected via the printer
•
driver does not perform the color correction process.
■ CMS/GAMMA
TEXT.....................................CMS*, GAMMA
GRAPHICS ...........................CMS*, GAMMA
IMAGE ..................................CMS*, GAMMA
Specifies whether to perform color matching or correct color specifying the
gamma value.
You can specify the settings by data type of TEXT, GRAPHICS, and IMAGE.
If you change the setting for this item, availabilities of the following settings switch.
RGB SRCE PROF. (See the next
item)
MATCHING METHOD (See p. 5-51)
OUTPUT PROFILE (See p. 5-51)
GAMMA (See p. 5-52)
: Enabled X: Disabled
CMS GAMMA
X
X
X
X
SETUP Menu Settings
5
5-49