Canon Laser Shot LBP5970 User Manual page 227

5
CASSETTE(n) SIZE (n = 2, 3, 4)
5-30 SETUP Menu Settings
When printing custom size paper from UFR II Printer Driver, you can load the paper
•
either in portrait or landscape orientation. However, if you want to print custom size
paper of its long edges 297.0 mm or less when TRAY PAPER SIZE is set to MIXED
SIZES, load the paper in landscape orientation. When you are not printing from
UFR II Printer Driver, load the paper in portrait orientation.
NOTE
Select CUSTOM SIZE or CUSTOM SIZE R when you want to specify custom size
•
paper using application and print it. If a message that prompts you to change the
size of the paper appears during printing, press [Online] to clear the error before
printing again.
You cannot print on any area within 10 mm (4 mm for the PS printer driver) of the
•
edges of an envelope. (If you have selected the [Print with Upper Left of Sheet as
Starting Point] check box in [Finishing Details] in the UFR II printer driver, you can
extend the printable area to near the edges of the paper. For more details, see
Help of the UFR II printer driver.)
You can specify the same setting in TRAY PAPER SIZE in the SELECT FEEDER
•
menu.
CUSTOM SIZE*, CUSTOM SIZE R, 8K, 16K, MIXED SIZES
Specifies the size of the paper loaded in the paper cassettes (Cassette 2 to
Cassette 4) of the paper feeders.
IMPORTANT
When paper at a size of 8K or 16K is loaded in Cassette 2, 3, or 4, be sure to set
•
the setting for this item to 8K or 16K.
When you change the orientation of the custom size paper loaded in a paper
•
cassette frequently, it is convenient if you set CASSETTE(n) SIZE (n = 2, 3, 4) in
the control panel to MIXED SIZES. When CASSETTE(n) SIZE (n = 2, 3, 4) is set to
MIXED SIZES, you do not need to specify the setting for CASSETTE(n) SIZE (n =
2, 3, 4) each time you change the paper orientation. However, when specifying
MIXED SIZES, make sure that the size of the loaded paper matches the paper size
specified in the printer driver before printing. If they do not match, the printer may
stop printing, displaying the message <41 CHK PAPER SZE>, or a paper jam may
occur. Be sure to check if the paper size specified in the printer driver matches the
size of the paper loaded in the paper cassette before using the printer.
When printing custom size paper from UFR II Printer Driver, you can load the paper
•
either in portrait or landscape orientation. However, if you want to print custom size
paper of its long edges 297.0 mm or less when CASSETTE(n) SIZE (n=2, 3, 4) is
set to MIXED SIZES, load the paper in landscape orientation. When you are not
printing from UFR II Printer Driver, load the paper in portrait orientation.