Gradation Set - Canon Laser Shot LBP5970 User Manual

GRADATION SET.

GRADATION .........................OFF*, SMOOTH 1, SMOOTH 2
1
GRAPHICS*
1
IMAGE* ...............................ON*, OFF
1
* Displayed only when GRADATION is set to SMOOTH 1 or SMOOTH 2.
Specify this item if gradation of image data such as graphics (illustrations created
by an application) or images (bitmap data) cannot be printed smoothly (if the color
changes stand out).
SMOOTH 2 performs a smoother gradation than SMOOTH 1. If gradation is not
printed smoothly by specifying SMOOTH 1, specify SMOOTH 2.
You can also select a target for the smoothing process by switching ON/OFF for
GRAPHICS and IMAGE.
IMPORTANT
If COLOR HALFTONES or B & W HALFTONES is set to ERR DIFFUSION, the
setting for this item is disabled.
NOTE
The smoothing process can be specified only for graphics data in the printer driver.
For image data, the smoothing process can be specified only from the printer's
control panel.
SMOOTHING (AST)
SMOOTHING (AST) .............SMOOTH 1*, SMOOTH 2, OFF
1
GRAPHICS*
1
IMAGE* ...............................ON*, OFF
1
* Displayed only when SMOOTHING (AST) is set to SMOOTH 1 or SMOOTH 2.
Specifies whether to use the smoothing process which can print the outlines of
graphics (illustrations created by an application) and text smoothly.
SMOOTH 2 performs a smoother process than SMOOTH 1. If data is not printed
smoothly by specifying SMOOTH 1, specify SMOOTH 2.
You can also select a target for the smoothing process by switching ON/OFF for
GRAPHICS and IMAGE.
NOTE
The effect of the advanced smoothing process varies depending on the pattern of
text or graphics.
........................ON*, OFF
........................OFF*, ON
SETUP Menu Settings
5
5-53