Canon Laser Shot LBP5970 User Manual page 439

<FM SCALE ERROR>
Cause
Remedy
<HF HDD FULL>
Cause
Remedy 1 The printer is ready to print by pressing [Online], ignoring the current process.
Remedy 2 Delete any unnecessary data from among the data saved on the hard disk.
<PC LOAD "size">
Cause
Remedy 1 Load the paper of the size selected in the application (or the one specified by
7
Remedy 2 If you are using the multi-purpose tray, check the size of the paper in the
Remedy 3 Press [Feeder Selection], then select the paper cassette in which the paper of
Remedy 4 Press [Online], then print to the currently loaded paper forcibly. If you are using
IMPORTANT
If you open the front cover when the message <PC LOAD "size"> is displayed, the
message may disappear. However, be sure to follow the directions in the displayed
message to change the paper.
7-44 Message List
There is a character in which the number of coordinate points on the
contour lines exceeds the limitation of a pseudo-scalable font.
Perform "Error Skip", then continue printing. However, the characters with which
an error has occurred are not printed properly.
Free space in the hard disk has run out.
The paper of the size specified in the application is not loaded in the
paper cassette or multi-purpose tray, or the paper source for the different
paper size is selected.
scaling factors). (See "Loading Paper in the Paper Cassette," on p. 3-18)
multi-purpose tray, and when the size does not match the size specified in the
application (or the one specified by scaling factors), specify the setting properly.
(See "Loading Paper in the Multi-purpose Tray," on p. 3-48)
the matched size is loaded. (See "Selecting a Paper Source," on p. 3-12)
the multi-purpose tray, the paper size setting for the multi-purpose tray
automatically changes to the setting specified in the application.
<Auto Error Skip>
<Auto Error Skip>