Canon Laser Shot LBP5970 User Manual page 88

Error Message
Remote UI,
Display N/W Status
EM E-MAIL
ERROR
■ The error codes that are displayed in the e-mail receive log list*
*If multiple errors have occurred, only the error of the highest priority is displayed (high:
407 > low: 499).
Error Code
There was no response
for more than 5 minutes
when receiving e-mails. - Consult your network administrator.
407
Could not receive data
of 1 Kbyte (1024 byte)
for 10 minutes while
receiving e-mails.
The response <ERR>
408 was returned from the
POP server.
There was no response
412 for more than 5 minutes
when receiving e-mails.
The IP address of the
computer which sent
413 the e-mail is restricted in
[Receive/Print Range
Setting].
The size of the e-mail
420
data exceeded 1.5 GB.
The size of the e-mail
421
text exceeded 25 MB.
The size of the attached
422
files exceeded 100 MB.
Cause
Print
The printer could
not connect to
the POP3 server
-
because an error
had occurred in
its hard disk.
Cause
- If errors occur many times on the same e-mail
data, check if the e-mail data is normal.
Consult your network administrator.
- Consult your network administrator.
- If errors occur many times on the same e-mail
data, check if the e-mail data is normal.
- Consult your network administrator.
- Confirm the setting for [Receive/Print Range
Setting]. (See Network Guide)
Reduce the size of the e-mail data to 1.5 GB or
less.
Reduce the amount of the e-mail text.
Reduce the size of the attached files to 100 MB
or less.
E-mail Print (Only When the Hard Disk Is Installed)
Remedy
Clear the hard disk error on the
POP3 server.
Remedy
2
2-47