Canon Laser Shot LBP5970 User Manual page 232

IMPORTANT
This printer applies the optimum print mode for the interior of the printer according
•
to the type of the paper loaded in the multi-purpose tray. If the type of the paper
loaded in the multi-purpose tray and the setting for the print mode do not match,
this may result in crucial damage to the engine.
When printing from Windows or Macintosh using the multi-purpose tray, be sure to
match the type of the paper loaded in the multi-purpose tray, the setting for TRAY
PAPER TYPE, and the setting for [Paper Type] in the printer driver. If they do not
match, the printer stops printing, displaying an error message.
When printing from DOS, UNIX, or other operating system on which the printer
driver cannot be used, be sure to match the type of the paper loaded in the
multi-purpose tray, the setting for TRAY PAPER TYPE, and the setting for STD
PAPER TYPE.
The default value is MIXED TYPES. If MIXED TYPES is specified, the printer does
•
not check the type of the loaded paper against the paper type specified in the
printer driver. Be sure to check if the paper type specified in the printer driver
matches the type of the paper loaded in the multi-purpose tray before using the
printer.
If an item other than PLAIN PAPER and PLAIN PAPER L is specified, you cannot
•
perform 2-sided printing.
When using coated paper at a size other than sizes of 106 to 169 g/m
•
following settings.
- When using paper of 105 g/m
- When using paper of 170 to 220 g/m
NOTE
You can specify the same setting in TRAY PAPER TYPE in the SELECT FEEDER
menu.
CASSETTE1 TYPE
MIXED TYPES*, PLAIN PAPER, PLAIN PAPER L, LABEL
Specifies the type of the paper to be loaded in Cassette 1. This printer internally
applies the optimum print mode for the paper type specified in this item.
Each print mode supports the following paper types.
PLAIN PAPER:
•
PLAIN PAPER L: Specify when the paper curls excessively on printing plain
•
LABEL:
•
2
or less: Set STD PAPER TYPE to PLAIN PAPER
2
: Set STD PAPER TYPE to COATED
PAPER and COATED PAPER in
SP.PRINT MODE in the USER MAIN.
options to ON.
Plain Paper (64 - 105 g/m
2
paper (64 g/m ) with PLAIN PAPER specified or when the
printing speed drops on printing paper of 279.4 mm wide
(Letter size) or less continuously.
Labels
2
, perform the
2
)
SETUP Menu Settings
5
5-35