IMPORTANT
Match the paper type specified in the SETUP menu in the printer and that specified in the
•
printer driver. If they do not match, the message <PC LOAD "size"> appears. In this
case, the setting value for CASSETTE(n) TYPE (n = 1, 2, 3, 4) is changed to that in the
printer driver by pressing [Online], allowing you to continue printing.
Be sure to match the type of the paper loaded in the paper cassette and the following
•
settings. If they do not match, this may result in crucial damage to the engine.
- The setting for [Paper Type] in the printer driver*
- The setting for CASSETTE(n) TYPE (n = 1, 2, 3, 4)
* When you are printing from an operating system on which you cannot use the printer driver (such as
MS-DOS and UNIX), match the setting for STD PAPER TYPE and the type of the loaded paper (See p.
5-33).
If CASSETTE(n) TYPE (n = 1, 2, 3, 4) is set to MIXED TYPES, the printer does not check
•
the type of the loaded paper against the paper type specified in the printer driver. Make
sure that the paper type specified in the printer driver matches the type of the paper
loaded in the paper cassette before using the printer.
Loading Paper in the Paper Cassette
3
3-47