Canon Laser Shot LBP5970 User Manual page 446

Cause 4 You are using UFR II Printer Driver, and you loaded custom paper of its
long edges 297.0 mm or less and printed when TRAY PAPER SIZE,
CASSETTE2 SIZE, CASSETTE3 SIZE, or CASSETTE4 SIZE in the FEEDER
MENU options in the SETUP menu was set to MIXED SIZE.
Remedy Load the paper in landscape orientation, then print again.
Cause 5 When the UFR II printer driver was not used, custom size paper was
loaded in landscape orientation to be printed.
Remedy Load the paper in portrait orientation, then print again.
Cause 6 There is still jammed paper inside the printer.
Remedy Remove any jammed paper and print again. (See "Paper Jams," on p. 7-4)
The hard disk cannot be used.
Cause 1 HARD DISK in the CONTROL MENU options in the SETUP is set to OFF.
Remedy Set HARD DISK (See p. 5-25) to ON, and then perform a hard reset.
Cause 2 An error has occurred in the hard disk.
Remedy Format the hard disk in HDD MAINTENANCE (See p. 5-73) in the USER MAIN.
options in the SETUP menu. If the same error occurs, replace the hard disk.
Cause 3 The hard disk is not installed properly.
Remedy Turn the printer OFF, then check if the hard disk is installed properly. (See
Getting Started Guide)
Cause 4 The data cannot be saved on the hard disk because there is not sufficient
free space in the hard disk.
Remedy Delete any unnecessary jobs from among the jobs saved on the hard disk.
Jobs cannot be saved.
Cause 1 The data cannot be saved on the hard disk because there is not sufficient
free space in the hard disk.
Remedy The printer is ready to print by pressing [Online], ignoring the print data. The
data of 2GB or larger in total cannot be saved.
Cause 2 The number of the jobs exceeded the number of jobs you can save in the
hard disk.
Remedy 1 The printer is ready to print by pressing [Online], ignoring the print data. Up to
100 jobs can be saved all together.
When You Cannot Obtain Appropriate Printout Results
7
7-51