Print Position - Canon Laser Shot LBP5970 User Manual

PRINT POSITION

5
PRINT GUARANTEE
SHOW WARNINGS
5-82 SETUP Menu Settings
AUTO*, CENTER, TOP LEFT
Specifies the printing position for an image.
If AUTO is specified, and if the data to be printed is in TIFF format in which the
printing position is specified, the image is printed on the specified position. If a
printing position is not specified, the image is printed in the center of the paper.
If CENTER is specified, the image is printed in the center of the paper even if the
data to be printed is in TIFF format in which the printing position is specified.
If TOP LEFT is specified, the image is printed on the upper-left of the paper even
if the data to be printed is in TIFF format in which the printing position is specified.
IMPORTANT
You cannot specify a printing position for data in JPEG format. If AUTO is specified,
the image is printed in the center of the paper.
OFF*, ON
Specifies a process method for the received TIFF data.
If OFF is specified, processing time is shortened by processing the received TIFF
data in order. However, <D9 IMG.REFER.ERR> may occur. In this case, specify
ON for this item.
If ON is specified, <D9 IMG.REFER.ERR> can be prevented from occurring
because the printer processes the TIFF data after receiving all of it.
NOTE
Depending on the setting for SHOW WARNINGS (See the next item), the display
•
setting for the error message varies.
This item is displayed only when an optional hard disk is installed.
•
PRINT*, PANEL, OFF
Specifies the display setting for the error message in case of an error occurring.
If PRINT is specified, the printer prints the content of the error and exits the job.
If PANEL is specified, the error message appears in the display, and the printer
stops printing.
If OFF is specified, the printer exits the job without displaying anything even if an
error occurs.