Canon Laser Shot LBP5970 User Manual page 435

<DA PDF ERROR>
Cause
Remedy
<DA TRANSP.ERROR>
Cause
Remedy 1 Perform a soft reset in the RESET menu, optimize the PDF or flatten the
Remedy 2 Press [Online] to continue printing. However, the page with which an error has
<DB FONT MEM.FULL>
Cause
Remedy 1 Press [Online] to continue printing. However, the data with which an error has
7
Remedy 2 Decrease the number of the fonts to be downloaded onto this printer in the PS
<DB SYS.MEM.FULL>
Cause
Remedy 1 Press [Online] to continue printing. However, the data with which an error has
Remedy 2 Perform a soft reset using the RESET menu, increase the free space of RAM
7-40 Message List
PDF data which this printer cannot process was sent.
Press [Online] to continue printing. However, the data with which an error has
occurred is not printed properly.
Transparent image objects which this printer cannot process are included
in the PDF data.
transparent object to convert it into a format that this printer can process, and
then print again. (See the Adobe Acrobat Help.)
occurred is not printed properly.
The font memory of this printer has run out.
occurred is not printed properly.
printer driver, then print again.
The memory required for processing has run out.
occurred is not printed properly.
using the following procedure, register the data again, and then print again.
- Perform a hard reset or cycle the power of the printer (Be aware that all the
data in the memory will be deleted).
- Install an optional expansion RAM module. (See Getting Started Guide)
<Auto Error Skip>
<Auto Error Skip>
<Auto Error Skip>