Panel Language; Warning Step; Auto Error Skip - Canon Laser Shot LBP5970 User Manual

WARNING STEP

5

AUTO ERROR SKIP

PANEL LANGUAGE

5-20 SETUP Menu Settings
CHECK TONER ................... CONT.PRINTING*, STOP PRINTING
Specifies whether the printer should continue or stop printing when the following
message appears.
Warning Message
<16 PREP."color" TNR>
("color" indicates K, Y, M,
or C)
If CONT.PRINTING is specified, the printer continues printing, displaying the
above message. If STOP PRINTING is specified, the printer stops printing. Then,
the printer resumes printing after you release the printer from the Warning status
according to the displayed message.
NOTE
If <16 CHG."color" TNR> appears, and the printer stops printing, replace the toner
•
cartridge, and then print again.
If STOP PRINTING is specified for this item, the message <16 PREP."color" TNR>
•
changes to <16 CHG."color" TNR>, and the printer stops printing.
OFF*, ON
Specifies whether the printer should automatically use the function that, when an
error has occurred, releases the printer from the error temporarily (Error Skip) and
continues the job.
If OFF is specified, you need to skip the error by pressing [Online].
If is ON is specified, the printer skips the error automatically without you pressing
[Online].
NOTE
The Error Skip function is only for skipping an error temporarily. Therefore, the data
•
may not be printed properly.
For the types of error from which the printer can be released temporarily, see
•
"Message List," on p. 7-23.
If ON is specified for this item, the printer automatically skips all the errors it can
•
skip automatically even when multiple errors are occurring.
ENGLISH*, FRENCH, GERMAN, ITALIAN, SPANISH
Confirm the language that is displayed in the display.
Printer Status
The toner cartridge is nearing the end of its life and
needs to be replaced.