Resetting The Counter Of The Fixing Unit - Canon Laser Shot LBP5970 User Manual

Resetting the Counter of the Fixing Unit

After replacing the fixing unit, reset the counter using the following procedure in
order to clear the message <E5 PREP.FIX.UNIT> displayed in the control panel.
IMPORTANT
Perform this operation only after replacing the fixing unit. If you reset the counter without
replacing the fixing unit, the counter does not operate properly, resulting in damage to the
printer.
1
Online
2
Settings
6
3
Utility
Settings
OK
4
Utility
Settings
OK
6-52 Replacing the Fixing Unit
Press [Online].
The Online indicator goes off, allowing you to specify the settings on the control
panel.
Press [Settings].
SETUP
CONTROL MENU
Select USER MAIN. using [
USER MAIN.
ADJ.START POS. →
The options for USER MAIN. are displayed.
Select INIT.COUNTER using [
INIT.COUNTER
FIXING UNIT
The settings for initializing the counter are displayed.
→
] and [ ], then press [OK].
→
] and [ ], then press [OK].
→