Canon Laser Shot LBP5970 User Manual page 459

When printing from Windows, streaks appear on the printed paper, diagrams are
printed with their colors partially different from the data, or diagrams that are not filled
in with any color do not appear through another data over them and cannot be printed
in correct color.
Cause
Remedy
Colored text appears to be blurred.
Cause
Remedy 1 Print again with thinner fonts.
Remedy 2 Set [Matching Method] to [Perceptual [Monitor Color Matched]] in the printer
7
Black text appears to be blurred.
Cause
Remedy 1 Set PURE BLACK TEXT (See p. 5-98) in the PS options to ON.
Remedy 2 Set OUTPUT PROFILE (See p. 5-97) in the PS options to TR Normal or TR
Remedy 3 Set RGB PURE BLACK (See p. 5-98) in the PS options to ON.
7-64 When You Cannot Obtain Appropriate Printout Results
The superimposed areas are misaligned because the document is printed
with its size enlarged or reduced, or any complicated superimpose
process is specified in the application.
Specify the following settings in the PCL 6/UFR II printer driver.
- For the UFR II printer driver: In the [Quality] sheet, click [Details], and then set
[Rendering Rate] to [24 BPP].
- For PCL 6 Printer Driver: Specify the same setting as for the UFR II printer
driver. For more details, see Help of the PCL 6 printer driver.
A bold font is being used for the colored text.
driver.
In order to specify the setting for [Matching Method], display the [Matching]
sheet by selecting the [Manual Color Settings] check box in the [Quality] sheet,
and then clicking [Color Settings].
When you are using the PS printer driver, black text is printed with the
toner of Cyan (C), Magenta (M), Yellow (Y), and Black (Bk).
Also, you can specify the same setting in the PS printer driver. For more details,
see Help of the PS printer driver.
Photo.
Also, you can specify the same setting in the PS printer driver. For more details,
see Help of the PS printer driver.