Canon Laser Shot LBP5970 User Manual page 541

Printable area
8
8-50 Specifications
PCL 5c/PCL 6
Data cannot be printed within a 4.23 mm (10 mm for
envelopes) margin on all sides of the paper.
PS
Data cannot be printed within a 4 mm margin on all sides
of the paper.
UFR II
Data cannot be printed within a 5 mm (10 mm for
envelopes) margin on all sides of the paper.
* If you are using the PS/UFR II printer driver and select
the [Print with Upper Left of Sheet as Starting Point]
check box in the printer driver, you can extend the
printable area to near the edges of the paper.
In order to specify the setting for [Print with Upper Left of
Sheet as Starting Point], display the following dialog box.
- For UFR II Printer Driver: Display the [Finishing
Details] dialog box by clicking [Finishing Details] in the
[Finishing] sheet.
- For PS Printer Driver: See Help of the PS printer
driver.
However, when a document with no margins is printed,
the data may be printed with the edges missing or the
edge of paper may blot during color printing even if the
[Print with Upper Left of Sheet as Starting Point] check
box is selected. In this case, specify the scaling factor in
the PS/UFR II printer driver to print smaller so that any
data on the document will not miss, and then print again.