Resetting The Counter Of A Toner Cartridge - Canon Laser Shot LBP5970 User Manual

8
6
If you replaced a toner cartridge when <1G CHG."color" TNR> was not being displayed,
reset the counter using the procedure "Resetting the Counter of a Toner Cartridge" (p.
6-10).

Resetting the Counter of a Toner Cartridge

If you replaced a toner cartridge when <1G CHG."color" TNR> was not being
displayed, reset the counter using the following procedure. If you do not reset the
counter, lifetime of the toner cartridge cannot be detected properly.
IMPORTANT
Perform this procedure only after you replaced a toner cartridge when <1G CHG."color"
TNR> was not being displayed.
6-10 Replacing Toner Cartridges
Close the toner cover.
IMPORTANT
If you cannot close the toner cover, check if the toner cartridges are installed
•
properly. If you try to close the toner cover forcefully, this may result in damage to
the printer or toner cartridges.
Do not leave the toner cover open for a long time after installing the toner cartridge.
•
NOTE
The message <1G CHG."color" TNR> takes several seconds to disappear after the
toner cartridge is installed. If the message <1G CHG."color" TNR> does not
disappear, remove the replaced toner cartridge, hold the toner cartridge so that its
tab is at the bottom, shake the cartridge up and down forcefully again to evenly
distribute the toner inside the cartridge, and then install the toner cartridge.