Printing A Job Saved In A Box (Stored Job Print) - Canon Laser Shot LBP5970 User Manual

Job 9
Reset
Utility
Settings
2
10
OK

Printing a Job Saved in a Box (Stored Job Print)

In a stored job print, a job is saved on the hard disk in the printer by specifying
[Store] from the computer, and the job is printed by the printer's control panel or
Remote UI. For details on using the Remote UI, see "Remote UI Guide".
This section describes the procedure for printing using the printer's control panel.
NOTE
The saved jobs remains in the hard disk even after being printed. When you want to
•
delete the saved jobs, use the Remote UI. (See Remote UI Guide)
Using the printer driver, you can change the name of the data to be saved when printing
•
the data. Enter the name with 24 or less alphanumeric characters.
1
2-54 Printing/Saving Jobs (Only When the Hard Disk Is Installed)
Select a number using [ ] and [
[ ] and [ ].
Repeat this operation to enter the password.
1
1
NOTE
Only numbers can be entered from the control panel.
•
Depending on the version of the encrypted secured print driver, you can specify
•
alphabetic characters and marks for passwords. Print an encrypted secured print
job from the Remote UI if the password contains any alphabetic characters or
marks (See Remote UI Guide).
After entering the specified password, press [OK].
1234
The specified file is printed. If you enter a wrong password, the entered password
disappears. In this case, re-enter the correct password.
Select [Store] in the printer driver on the computer, specify
the box in which you want to store the job, and then print.
NOTE
Up to the total of 100 jobs in all the boxes can be saved.
], then move a digit using