Table of Contents
Advertisement
Specify OFF for this item when you want to match the setting of the orientation or
printing side for the last page with those for its previous page, such as when you
want to print previously printed paper etc. whose printing orientation or printing
side is fixed.
NOTE
The setting is effective only when 2-SIDED PRINT. is set to ON.
QUALITY MENU Options
GRADATION LEVEL
HIGH 1*, HIGH 2
Specifies the gradation level for printing data.
Specify HIGH 1 when printing pictures or other data in general quality and specify
HIGH 2 when printing in higher quality.
● About memory amount required for using the HIGH 2 mode
Printing in the HIGH 2 mode requires a large amount of memory for data
process. Therefore, when the HIGH 2 mode is specified, the message <39 SPL
MEM.FULL> may appear depending on the amount or type of data, disabling
printing. In this case, print with GRADATION LEVEL set to HIGH 1, or install an
optional expansion RAM module as needed. For details on the optional
expansion RAM modules, see "Expansion RAM," on p. 1-14.
TONER SAVE
OFF*, ON
Specifies whether to use the toner save mode that is suitable for when printing a
proof sheet.
SETUP Menu Settings
6
6-35
Advertisement
Table of Contents
