Problems With The Printout Results - Canon Laser Shot LBP5970 User Manual

Remedy 2 Delete any unnecessary jobs from among the jobs saved on the hard disk.
Cause 3
Remedy 1 The printer is ready to print by pressing [Online], ignoring the print data. The
Remedy 2 Delete any unnecessary jobs from among the jobs saved on the hard disk.
The printing speed drops when printing paper with a narrower width continuously.
Cause
Remedy

Problems with the Printout Results

Unreadable characters are printed.
7
Cause 1
Remedy
Cause 2
Remedy
A blank page cannot be printed.
Cause
Remedy
7-52 When You Cannot Obtain Appropriate Printout Results
The amount of the print jobs exceeded the amount of jobs you can save in
the hard disk.
data of 2GB or larger cannot be saved.
This kind of phenomenon may occur depending on the printing
preferences or setting for SP.S-SIZE MODE2.
Set SP.S-SIZE MODE2 (See p. 5-72) in the USER MAIN. options in the SETUP
menu to 1 or 2, and then print again. However, the print quality may deteriorate
because the printer gives the priority to the printing speed.
The data is printed from Windows without the supplied printer driver
installed for Windows.
Install the supplied printer driver for Windows, then print again.
The printer setting in the DOS application is not appropriate.
Specify the printer setting in the DOS application to the one that is compatible
with this printer.
PAPER SAVE is set to ON.
When printing a blank page, set PAPER SAVE (See p. 5-75) and (See p. 5-80)
to OFF.