Canon Laser Shot LBP5970 User Manual page 429

<59 JOB RX ERROR>
Cause
Remedy 1 Press [Online] to cancel printing, then print again.
Remedy 2 A problem may be occurring in the network you are using. Check the status of
<60 KEY MNG.ERR.1>
Cause
Remedy
<60 DECODE ERROR>
Cause
7
Remedy
<61 PRINT SET ERR>
Cause
Remedy 1 Perform a soft reset in the RESET menu, set RESOLUTION (See p. 5-43) in the
Remedy 2 Press [Online] to continue printing from the next data. However, the data with
<98 CHG."color" DRUM>
Cause
Remedy
7-34 Message List
The printer received any unanalyzable data while it is receiving a job, or it
timed out.
the network that you are using.
The file related to key management is broken.
Select the SETUP menu ➞ the INTERFACE MENU options ➞ NETWORK
MENU ➞ REMOTE UI SET. ➞ SSL, and then make sure that OFF is specified.
After that, restart the printer, and then regenerate the key and certificate and
specify the settings for SSL from the Remote UI. After setting the key
management and SSL, restart the printer again. (See Remote UI Guide
"Chapter 3 Appendix")
The printer could not analyze encrypted secured print data.
Perform a soft reset using the RESET menu, then print again.
Long size paper was printed in the Super Fine mode.
QUALITY MENU options in the SETUP menu to FINE, and then print again.
which an error has occurred is not printed.
The drum cartridge of K (Black), Y (Yellow), M (Magenta), or C (Cyan)
cannot be used.
Replace the drum cartridge of the indicated color with a new one. (See
"Replacing Drum Cartridges," on p. 6-15)
<Auto Error Skip>
<Auto Error Skip>