Toner Save; Adjust Print Position - Canon LBP251dw User Manual

Toner Save

You can save toner when performing Report Print.
Off
On
<Adjustment/Maintenance>

Adjust Print Position

For each paper source, you can adjust the print position. You can adjust the print position in the range -5.0 to +5.0 mm
in vertical direction, and in the range -3.0 to +3.0 mm in horizontal direction, both in increments of 0.1 mm.
Adjusting Print Position(P. 407)
Multi-Purpose Tray
Adjust Vertically (Front Side)
-0.20 to 0.00
Adjust Horizontally (Front Side)
-0.12 to 0.00
Adjust Vertically (Back Side)
-0.20 to 0.00
Adjust Horizontally (Back Side)
-0.12 to 0.00
Drawer 1
Adjust Vertically (Front Side)
-0.20 to 0.00
Adjust Horizontally (Front Side)
-0.12 to 0.00
Adjust Vertically (Back Side)
-0.20 to 0.00
Adjust Horizontally (Back Side)
-0.12 to 0.00
*
Drawer 2
Adjust Vertically (Front Side)
-0.20 to 0.00
Adjust Horizontally (Front Side)
-0.12 to 0.00
Adjust Vertically (Back Side)
-0.20 to 0.00
Adjust Horizontally (Back Side)
-0.12 to 0.00
Setting Menu List
to +0.20 (") or -5.0 to 0.0
to +0.12 (") or -3.0 to 0.0
to +0.20 (") or -5.0 to 0.0
to +0.12 (") or -3.0 to 0.0
to +0.20 (") or -5.0 to 0.0
to +0.12 (") or -3.0 to 0.0
to +0.20 (") or -5.0 to 0.0
to +0.12 (") or -3.0 to 0.0
to +0.20 (") or -5.0 to 0.0
to +0.12 (") or -3.0 to 0.0
to +0.20 (") or -5.0 to 0.0
to +0.12 (") or -3.0 to 0.0
<Toner Save>
to +5.0 (mm)
to +3.0 (mm)
to +5.0 (mm)
to +3.0 (mm)
to +5.0 (mm)
to +3.0 (mm)
to +5.0 (mm)
to +3.0 (mm)
to +5.0 (mm)
to +3.0 (mm)
to +5.0 (mm)
to +3.0 (mm)
333
Select <Off> or <On>