Power Save Time; Pwr Save In Err - Canon Laser Shot LBP5970 User Manual

NOTE
For details on Power Save Mode, see "Power Saving (Power Save Mode)," on p.
•
2-6.
You can specify whether the printer should enter Power Save Mode when an error
•
is occurring in the printer (when the Message indicator is on, or the number in the
message blinks). (See "PWR SAVE IN ERR": the next item)

PWR SAVE IN ERR

ON*, OFF
Specifies whether the printer should enter Power Save Mode when an error is
occurring in the printer (when the Message indicator is on, or the number in the
message blinks).
If this item is set to ON, the printer enters Power Save Mode even when an error is
occurring in the printer.
If this item is set to OFF, the printer does not enter Power Save Mode when an
error is occurring in the printer.

POWER SAVE TIME

10 minutes*, 15 minutes, 30 minutes, 60 minutes, 180 minutes, 5 minutes
Specifies the time interval until the printer enters Power Save Mode 1 (the Panel
Off mode).
NOTE
If the printer is in any of the following status, the printer does not enter Power Save
•
Mode (the Panel Off mode) even when the specified time has elapsed.
- An error is occurring in the printer (when the Message indicator is on, or the
number in the message blinks), and PWR SAVE IN ERR is set to OFF.
- During the printer's startup
- During a shutdown (Only when the hard disk is installed)
- While the hard disk is being initialized (Only when the hard disk is installed)
SETUP Menu Settings
5
5-19