Substitute Size; Sp.image Mode - Canon Laser Shot LBP5970 User Manual

If OFF is specified, the printer prints without performing a print check even when
the paper size specified in the application is different from the size of the paper
loaded in the multi-purpose tray or paper cassette. However, the printing speed
may drop. Also, because the paper is printed at the paper size specified in the
application, blank areas may appear on the printed paper or part of the images
may be missing when the size of the paper loaded in the multi-purpose tray or
paper cassette is different from the paper size specified in the application.
IMPORTANT
For automatic 2-sided printing, <41 CHK PAPER SZE> always appears and the
printer stops printing regardless of the setting for this item.

SUBSTITUTE SIZE

OFF*, ON
When the paper cassette for the paper size to be used is not set in the printer, the
printer switches the paper source to the following paper cassettes and prints.
Printer Driver Setting
A4
Letter
A3
Ledger (11 x 17)
If ON is specified, the printer switches the paper size.
If OFF is specified, the printer does not switch the paper size but stops printing,
displaying an error message.
NOTE
Even if ON is specified, the printer does not switch the paper size when the paper
source for the paper size is empty.

SP.IMAGE MODE

OFF*, LEVEL1, LEVEL2
Toner on the parts dense in color may not fix onto the paper and not printed
properly. In this case, specify LEVEL1 for this item. If the problem is not solved by
specifying LEVEL1, specify LEVEL2.
IMPORTANT
If this solves the problem, reset the setting to the default value, OFF.
•
If LEVEL1 or LEVEL2 is specified, the print density may be lighter than when OFF
•
is specified because the printer prints with the toner consumption adjusted.
Size of the Paper to
Be Printed
➞
Letter
➞
A4
➞
Ledger (11 x 17)
➞
A3
SETUP Menu Settings
5
5-71