Canon Laser Shot LBP5970 User Manual page 72

6
Specify the settings for [Print Settings] as the following, as
needed.
[Color Mode]
[Copies]
[Paper Size]
[Paper Type]
[Image Orientation]
[Print Position]
[Zoom]
[Enlarge Print
Area]
Specifies whether to print in color or in black and white.
Enter the number of copies (1 to 9999) to be printed.
Specify the size of the paper to be printed.
Specify the type of the paper to be printed.
Select the orientation of the image to be printed from
[Auto], [Vertical] (portrait), and [Horizontal] (landscape).
Select the printing position for the image from [Auto],
[Center], and [Top Left]. If [Auto] is selected, and if the
data to be printed is in TIFF format in which the printing
position is specified, the image is printed on the specified
position. If a printing position is not specified, the image
is printed in the center of the paper. You cannot specify a
printing position for data in JPEG format. Therefore, if
[Auto] is selected, the image is printed in the center of the
paper.
Select [Off] or [Auto] based on whether the printer should
print with scaling outputs according to the printable area.
Specifies whether the printer should print a document
with its printable area expanded. If the check box for this
option is selected, the printer prints with the printable
area expanded to the edges of the paper, with no
margins. However, depending on the print data to be
printed, the edge of paper may be missing partly during
printing or may blot during color printing.
Direct Print 2-31
2