Canon Laser Shot LBP5970 User Manual page 427

Cause 3
Remedy
Cause 4
Remedy
<53 STORE ERROR>
Cause 1
Remedy
Cause 2
7
Remedy
Cause 3
Remedy 1 The printer is ready to print by pressing [Online], ignoring the print data.
Remedy 2 Delete any unnecessary jobs from among the jobs saved on the hard disk.
Cause 4
Remedy 1 The printer is ready to print by pressing [Online], ignoring the print data.
Remedy 2 Delete any unnecessary jobs from among the jobs saved on the hard disk.
Cause 5
Remedy
Cause 6
Remedy
7-32 Message List
The number of the jobs exceeded the amount of jobs the printer can save
as secured print jobs (You can save up to 8 secured print jobs in the hard
disk.)
Press [Online] to cancel printing, delete any unnecessary secured print jobs,
and then print again.
The amount of the job data exceeded the amount of job data that you can
save on the hard disk as secured print jobs (You can save the data in total
of up to 4GB of secured print jobs, stored jobs, and paused jobs in the
hard disk. However, when SECURED TYPE in the CONTROL MENU
options is set to PDL, you can save only up to 1.88GB of data.
Press [Online] to cancel printing, resume any paused jobs or delete
unnecessary secured print jobs, and then print again.
The data for which a stored job print had been specified was sent from a
printer driver that is not for LBP5970.
Press [Online] to cancel the job.
The data cannot be saved on the hard disk because there is not sufficient
free space in the hard disk.
The printer is ready to print by pressing [Online], ignoring the print data.
The number of the jobs exceeded the number of jobs you can save on the
hard disk.
The amount of the print jobs exceeded the amount of jobs you can save
on the hard disk.
The specified box number is not correct.
Specify the correct box number.
HARD DISK in the CONTROL MENU options in the SETUP menu is set to
OFF.
Set HARD DISK (See p. 5-25) to ON.
<Auto Error Skip>