Sp.s-Size Mode - Canon Laser Shot LBP5970 User Manual

SP.S-SIZE MODE1

SP.S-SIZE MODE2
5
CLEANING
5-72 SETUP Menu Settings
-2 to 2; 0*
When printing after the paper is changed from narrower one (A5 size etc.) to
wider one (A4 size etc.), the printer may stop printing temporarily and cool down
the fixing unit so that the print quality is maintained. You can specify the waiting
time before the print operation begins for this case.
The smaller the setting value is, the more the printer gives priority to the image
quality when printing. However, the waiting time before the print operation begins
may be lengthened.
The greater the setting value is, the shorter the printer makes the waiting time
when printing. However, residual images of the previously printed text or images
may appear on both sides of the paper.
-2 to 2; 0*
When printing narrow paper (A5 size etc.) continuously, the printer may stop
printing temporarily and cool down the fixing unit so that the print quality is
maintained. You can specify the waiting time before the print operation begins for
this case.
The smaller the setting value is, the more the printer gives priority to the image
quality when printing. However, the waiting time before the print operation begins
may be lengthened.
The greater the setting value is, the shorter the printer makes the waiting time
when printing. However, residual images of the previously printed text or images
may appear on both sides of the paper when wider paper is printed after the
continuous printing.
-
If you touch the transfer belt of the ITB unit, this may result in deterioration in print
quality. In this case, clean the transfer belt of the ITB unit.
NOTE
Cleaning takes approximately 180 seconds.
•
The cleaning process cannot be canceled. Please wait until it is completed.
•