Plain Paper; Coated Paper; Std Format; Sp.print Mode - Canon Laser Shot LBP5970 User Manual

■ STD FORMAT

5

SP.PRINT MODE

■ PLAIN PAPER

■ COATED PAPER

5-74 SETUP Menu Settings
-
Erases the contents of the hard disk.
STD FORMAT performs a standard format of the hard disk. Perform this operation
when the problem is not solved by executing QUICK FORMAT.
IMPORTANT
If the message <CANNOT EXECUTE> appears when STD FORMAT is executed,
•
the hard disk is not formatted.
When performing STD FORMAT, remove all the interface cables (the LAN cable
•
and USB cable) connected to this printer.
While STD FORMAT is being executed, <FORMATTING> is displayed in the
•
display. Wait for a moment until the format is completed.
NOTE
This item is displayed only when an optional hard disk is installed.
OFF*, MODE 1, MODE 2, MODE 3
When printing plain paper, the paper may curl or the toner does not fix well. In this
case, specify the setting for this item.
OFF: Does not apply Special Print Mode.
•
MODE 1: Specify when the printing speed drops on printing plain paper
•
of 279.4 mm wide (Letter size) or less continuously.
MODE 2: Specify when the toner does not fix well by specifying OFF.
•
MODE 3: Specify when the toner still does not fix well by specifying
•
MODE 2.
OFF*, ON
Specify the setting for this item according to the type of the coated paper to be
used.
OFF: Specify when printing coated paper of 106 to 169 g/m
•
ON: Specify when printing coated paper of 170 to 220 g/m
•
2
.
2
.