Layout Menu Options - Canon Laser Shot LBP5970 User Manual

LAYOUT MENU Options

COPIES
1 to 9999; 1*
Specifies the number of copies to be printed.
The printer prints the specified number of copies.
OFFSET Y/OFFSET X
-50.0 to 50.0; 0.0* (mm)
Adjusts the printing position in the vertical direction (Y) or the horizontal direction
(X) by the specified value.
The printing position changes as follows according to the increase and decrease
of the specified value.
OFFSET Y:
OFFSET X:
Front
ABC
IMPORTANT
If any part of the print image lies outside the printable area after adjusting the
printing position, the part will be missing in the print result.
NOTE
Each time you press [
time you press [
holding down [
As the value increases, the gutter width in the Y direction
increases.
As the value decreases, the gutter width in the Y direction
decreases.
As the value increases, the gutter width in the X direction
increases.
As the value decreases, the gutter width in the X direction
decreases.
Back
DEF
Range adjusted
by "OFFSET Y"
Adjust using
OFFSET X
and OFFSET Y
], the value increases in 0.5 mm increments, and each
], the value decreases in 0.5 mm increments. If you keep
] or [ ], the speed of the value changing is increased.
Range adjusted by "OFFSET X"
X X
+ direction
Front Back
Y
Y
ABC DEF
SETUP Menu Settings
5
5-39