Fixing Unit; Recvry Printing; Chk Paper Size - Canon Laser Shot LBP5970 User Manual

RECVRY PRINTING

INIT.COUNTER

■ FIXING UNIT

5

CHK PAPER SIZE

5-70 SETUP Menu Settings
ON*, OFF
Specifies whether to print the partially printed page when the printer stops printing
due to a paper jam or an error occurring.
If ON is specified for this item, the printer prints from the page in which a paper
jam or error occurred.
If OFF is specified for this item, the printer does not print from the partially printed
page but prints from the next page when a paper jam or error has occurred.
When the printer is performing 2-sided printing, it does not print the reverse page
of the partially printed page. The printing starts from the front side of the next
sheet.
-
Resets the counter in this item after replacing the fixing unit.
By initializing the counter of the fixing unit, you can clear the fixing unit
replacement message <E5 PREP.FIX.UNIT> displayed on the control panel.
If FIXING UNIT is selected, a confirmation message <OK?> is displayed.
Pressing [OK] at this point starts the initialization. The printer does not initialize
the counter if you press [Online] without pressing [OK].
IMPORTANT
Perform this operation only after replacing the fixing unit. If you reset the counter
without replacing the fixing unit, the counter does not operate properly, resulting in
damage to the printer.
OFF*, ON
Specifies whether the printer should stop printing, displaying the message <41
CHK PAPER SZE> or continue printing when TRAY PAPER SIZE, CASSETTE2
SIZE, CASSETTE3 SIZE, or CASSETTE4 SIZE is set to MIXED SIZES.
If ON is specified, the printer may stop printing, displaying <41 CHK PAPER
SZE>, when the paper size specified in the application is different from the size of
the paper loaded in the multi-purpose tray or paper cassette. The paper on which
the error occurred is output automatically. You can also continue printing by
pressing [Online]. However, the data may not be printed properly, or a paper jam
may occur.