User Main. Options; Adj.start Pos - Canon Laser Shot LBP5970 User Manual

USER MAIN. Options

ADJ.START POS.

OFFSET Y.............................-5.0 to 5.0; 0.0* (mm)
OFFSET X (TRAY)................-10.0 to 10.0; 0.0* (mm)
OFFSET X (CASS1) .............-10.0 to 10.0; 0.0* (mm)
OFFSET X (CASS2)*
OFFSET X (CASS3)*
OFFSET X (CASS4)*
OFFSET X (DUP.).................-10.0 to 10.0; 0.0* (mm)
*1 OFFSET X (CASS2), OFFSET X (CASS3), and OFFSET X (CASS4) are displayed only when the
optional paper feeders are installed.
Specifies the printing position of the paper in the specified paper source. Adjusts
the position in the vertical direction (Y) or the horizontal direction (X) by the
specified value.
The setting values are indicated in millimeters (mm), and you can adjust the
position in 0.1 mm increments using [
Adjust the printing position in the vertical direction using OFFSET Y.
Adjust the printing position in the horizontal direction using OFFSET X for each
paper source.
You can also adjust the printing position for 2-sided printing using OFFSET Y as
well as OFFSET X for each paper source.
Additionally, if you want to make the printing position adjustment only for the
surface of paper which is output to the output tray facing down, use OFFSET X
(DUP.).
IMPORTANT
If any part of the print image lies outside the printable area after adjusting the
printing position, the part will be missing in the print result.
NOTE
You can check the adjusted printing position in PRNTPOSNPRINT (See p. 5-107)
•
in the UTILITY menu.
For adjusting the printing position, see "Adjusting the Printing Position," on p. 6-62.
•
Be aware that, when adjusting the printing position for 2-sided printing, the
•
orientation of the images on the reverse pages varies depending on the printing
orientation or setting for BIND.LOCATION (See p. 5-40).
1
..........-10.0 to 10.0; 0.0* (mm)
1
..........-10.0 to 10.0; 0.0* (mm)
1
..........-10.0 to 10.0; 0.0* (mm)
] and [ ].
SETUP Menu Settings
5
5-69