Canon Laser Shot LBP5970 User Manual page 431

Remedy 2 After performing a soft reset using the RESET menu, perform a hard reset to
Remedy 3 Perform "Error Skip" to continue the job. However, the data with which an error
<D8 VERSION ERROR>
Cause
Remedy
<D8 SYNTAX ERROR>
Cause
Remedy 1 Press [Online] to continue printing from the next data. However, the page with
Remedy 2 Confirm the data to be printed, then print again.
<D8 nn ERROR> ("nn" represents two-digit alphanumeric characters)
7
Cause
Remedy
<D9 IMG.DATA ERR.>
Cause
Remedy
<D9 IMG.REFER.ERR>
Cause
Remedy
7-36 Message List
increase the free memory space or cycle the power of the printer, and then print
again. (Be aware that all the data in the memory that the printer has received
will be deleted.)
has occurred is not printed properly.
You tried to print from a printer driver that is not for LBP5970.
Print from the printer driver for LBP5970.
Invalid data is sent when printing using UFR II Printer Driver.
which an error has occurred and its subsequent pages are not printed.
A problem has occurred and the printer does not operate properly.
Cycle the power of the printer. If the message appears even after cycling the
power of the printer, note down the message in the display, and contact your
local authorized Canon dealer.
Data which this printer cannot process is included in TIFF data or JPEG
data.
This printer cannot print the data. Press [Online] to cancel the job.
Data which this printer cannot process is included in TIFF data.
This printer cannot print the data. Press [Online] to cancel the job.