Settings In Tech. Rep. Mode; Counter Reset; Running Mode; Option Board - Konica Minolta bizhub C250P Service Manual

Field Service Ver. 2.0 Mar. 2006

16.3 Settings in Tech. Rep. Mode

16.3.1

Counter Reset

Functions • To check the number of hours or times each of the different maintenance parts has
been used.
• To clear the count of each counter.
Use • When each of the maintenance parts is replaced.
Setting/ • To clear the count of a counter, select the specific part and press the Clear key.
Procedure • If a counter is cleared mistakenly, press the Interrupt key, which will undo the clearing
operation.
• It is not possible to clear the count of the counters for the Fusing Unit, Transfer Belt
Unit, and IU, which are provided with a new unit detection function.
• ALL
• Transfer Roller
• Ozone Filter
• Tray 1
• Tray 2
• Tray 3
• Tray 4
• Bypass
• LCT
• Finisher
16.3.2

Running Mode

Functions • To test the printing operation in Running Mode.
Use • Use to check the printing operation in Running Mode from each paper source.
Setting/ 1. Display the Running Mode and click the Menu/Select key.
Procedure 2. Select the position for paper feed and click the Menu/Select key.
3. Select the paper size and paper type.
4. Press the Men/Select key to start the Running Mode.
5. Pressing the Cancel key will stop operation.
16.3.3

Option Board

Functions • To set when the Optional HDD Kit, Local Interface Kit is mounted.
Use • Use when setting up the HDD Kit, Local Interface Kit is mounted.
Setting/ • Setting modes are HDD and local I/F.
Procedure • The default setting is "Unset."
local I/F
HDD
NOTE
• When the setting has been changed, turn OFF and ON the Main Power Switch.
: All counters
: Number of times a sheet of paper is fed through
: Number of times a sheet of paper is fed through
: Number of sheets of paper fed from Tray 1
: Number of sheets of paper fed from Tray 2
: Number of sheets of paper fed from Tray 3
: Number of sheets of paper fed from Tray 4
: Number of sheets of paper fed from the Bypass
: Number of sheets of paper fed from LCT
: Number of sheets of paper fed out of the Finisher
: Set
: Set
16. TECH. REP. MODE
"Unset"
"Unset"
185