Setting Auto Reset Notification (Auto Reset Notification) - Konica Minolta bizhub 500 User Manual

8

Setting Auto Reset Notification (Auto Reset Notification)

When the automatic panel reset operation is performed, a message can be
displayed, requesting confirmation to reset the settings in Enlarge Display
mode.
In addition, it is possible to specify when the message is displayed,
requesting confirmation to reset the settings in Enlarge Display mode.
0 The Enlarge Display Auto Reset Notification Screen will not be displayed
as factory default.
0 Even if the machine is set to display the Enlarge Display Auto Reset
Notification Screen, the Enlarge Display Confirmation Screen will be
displayed when the same period of time is specified to activate Auto
Reset and System Auto Reset.
0 The factory default setting is "OFF".
1
Downloaded From ManualsPrinter.com Manuals
8-44
Press [Accessibility] on the control
panel.
The Accessibility Setting Screen will
be displayed.
Advanced Information
bizhub 500/420/360 (Phase 3)