Maintenance Procedure (Periodical Check Parts); Replacing The Tray 1 Feed Roller; Replacing The Tray 1 Separation Roller Assy - Konica Minolta bizhub C250P Service Manual

6. Periodical check
6.5

Maintenance procedure (Periodical check parts)

NOTE
• The alcohol described in the cleaning procedure of Maintenance represents the
isopropyl alcohol.
6.5.1

Replacing the Tray 1 Feed Roller

[3]
[4]
6.5.2

Replacing the Tray 1 Separation Roller Assy

18
[2]
[1]
4038F2C001DA
[6]
[5]
4037F2C003DB
[2]
[1]
4038F2C002DB
Field Service Ver. 2.0 Mar. 2006
1. Slide out the Tray 1.
2. Lock the Paper Lifting Plate [1] into
position.
3. Snap off the C-clip [2] from the Tray 1
Feed Roller Assy [3].
4. Remove the shaft for the Tray 1 Feed
Roller Assy [3] from the front Bush-
ing.
5. Snap off the C-clip [4], one collar [5]
and remove the Tray 1 Feed Roller
[6].
6. To reinstall, reverse the order of
removal.
7. Select [Service Mode]→ [Counter] →
[Life] of the Jig software and clear
the count of [1st.].
NOTE
• Replace the Tray 1 Feed Roller and
Tray 1 Separation Roller at the
same time.
1. Slide out the Tray 1.
2. Remove two Screws [1] and the Tray
1 Separation Roller mounting
bracket Assy [2].